custom snorkel

[jsttry]

Have done a search but can't seem to find anything. Has anyone done a home made snorkel on their 80 series? Was thinking of getting some ideas instead of paying for $300-$500 for a safari.

[stinky]

J, as already discussed, i will gladly offer a reacharound if you can do this x2

tried looking a while ago, check these threads, last one is 80 specific.

http://www.outerlimits4x4.com/phpBB2/vi ... ht=snorkel

http://www.outerlimits4x4.com/phpBB2/vi ... ht=snorkel

http://www.outerlimits4x4.com/phpBB2/vi ... 03&start=0

http://www.outerlimits4x4.com/phpBB2/vi ... ht=snorkel

[jsttry]

thanks to another forum I just got this. Looks the goods:

g'day

i have a stainless snork on mine, made it about 2 months ago

pritty easy to make, all ya need is.

4" stailess steel pipe (forgot how long)
1 X 4" rubber 90 degree bend
2 X 4" rubber 45 degree bend
1 X 4" - 3" rubber bend (this will go straight onto the air box
7 X 4" hose clamps
a mouting bracket with i just made from a bracket that i chopped up
a peice of rubber to go around the hole to make it look neat
a small peice of rubber to go between the hose clamps and the pannal
6 teck screws (2 to go in through 2 of the hose clamps and 4 for the bracket)


i got all the bends from a mate who works for volvo truck, you can go to any truck place or order them in at penrite
i got the pipe from a metal joint so same deal you can get them from any were


the bracket on the roof


the rubber around the hole

how it connects to the air box


and it on the car






heres a write up a made did on a pootrole
http://www.mudrhino.com.au/Docs/DIY3.pdf

hope this helps all up cost prob 200