Page 1 of 1
custom snorkel
Posted: Wed Aug 08, 2007 11:20 pm
by jsttry
Have done a search but can't seem to find anything. Has anyone done a home made snorkel on their 80 series? Was thinking of getting some ideas instead of paying for $300-$500 for a safari.
Posted: Thu Aug 09, 2007 9:57 am
by stinky
Posted: Thu Aug 09, 2007 4:50 pm
by jsttry
thanks to another forum I just got this. Looks the goods:
duck wrote:g'day
i have a stainless snork on mine, made it about 2 months ago
pritty easy to make, all ya need is.
4" stailess steel pipe (forgot how long)
1 X 4" rubber 90 degree bend
2 X 4" rubber 45 degree bend
1 X 4" - 3" rubber bend (this will go straight onto the air box
7 X 4" hose clamps
a mouting bracket with i just made from a bracket that i chopped up
a peice of rubber to go around the hole to make it look neat
a small peice of rubber to go between the hose clamps and the pannal
6 teck screws (2 to go in through 2 of the hose clamps and 4 for the bracket)
i got all the bends from a mate who works for volvo truck, you can go to any truck place or order them in at penrite
i got the pipe from a metal joint so same deal you can get them from any were
the bracket on the roof
the rubber around the hole
how it connects to the air box
and it on the car
heres a write up a made did on a pootrole
http://www.mudrhino.com.au/Docs/DIY3.pdf
hope this helps all up cost prob 200
