Outer Limits 4x4 Board

I AM IN THE PROCESS OF DOIN THE GTI CONVERSION ON MY SUZUKI SIERRA AND I AM WOUNDERING WHAT OPTIONS I HAVE ON MY FUEL LINES WOULD LIKE TO NO ALL THE PRO'S AND CON'S ANY ONE THAT HAVE DONE THIS CONVERSION COULD YOU PLEASE SHARE ANY OF YOUR KNOWLEDGE I WOULD APPRECIAT IT ALOT
P.S WOULD LOVE TO SEE SOME PICS OR DIAGRAMS

Stop SHOUTING.

Search and u will find.

u will need at least a grinder or a right angle drive for the dizzy, custom headers and efi wiring done.

fuel lines - run new ones if u want. easy to do. and u will need a efi pump installed.

u can use the orig fuel in line ok but upgrade the return line to same as inlet size.

give us yell if you need any help its not a hard conversion just finished mine and a mates done his but where both using microtech computers
this is mine
http://www.cardomain.com/ride/2771483

things you will need are

Sierra steel pipe off the rear of the water pump
Use a set of sierra extractors and cut the flange plate off and weld a gti one on you should be able to get one from any exhaust shop
85 barina top hose
94 corolla top hose
Surge tank
VL fuel pump
Carby pump
5/16 bundy line (steel fuel line)
5/16 efi fuel line
1/2 fuel line
heater hose for the odds and ends
vacuum line

http://home.iprimus.com.au/pulsr/g13b/

quite a few details at that site. I run one in my 410, very booty fab so wont show pics
also use 413 sump and oil pick up.
bound to be other things but cant htink of them right now...

sorry left the caps lock on i was goin to angle drive it but was told the that my model of engine (1992) cant be angle driven with the original computer (is this true) just bout a surge tank pump and fuel pumps thankyou to everyone's imput

i have a manual with the GTI wiring diagrams of you want.

Mitch

Info on the mazda 323 disti swap. This should save you guys $$$
http://forums.off-road.com/suzuki-geo-a ... going.html