Page 1 of 1
Please Help (Need photos of HJ 61 / 12ht engine bay)
Posted: Fri Aug 10, 2007 4:56 pm
by Cruza62
Hi,
I can only find a few photos of the engine bay but they are not enough!
If anyone can help, I need as many photos of the entire engine bay as possible..?
Thanks
Posted: Fri Aug 10, 2007 6:55 pm
by KaMo
Have more...just need to find them.
Posted: Sat Aug 11, 2007 1:29 am
by Tapage
IP
Throtle Body
Turbo and Wastegate
Engine Bay
Posted: Sat Aug 11, 2007 5:20 pm
by Cruza62
Awesome, thanks mate. Might be pushing it but have you got any of the little valve things on the RHS inner guard.
Posted: Sun Aug 12, 2007 12:48 pm
by Tapage
RHS ..?
Posted: Sun Aug 12, 2007 12:56 pm
by big bundy
right hand side
Posted: Sun Aug 12, 2007 1:07 pm
by Tapage
Right means divers ( drivers side for me .. at the right side
)
I have this not sure if help ..
This come from a LHD 61
Engine Bay
Posted: Sun Aug 12, 2007 5:02 pm
by Cruza62
Just read your from USofA, the engine bay on yours is a lot different to what we have in AUS. Correct me if I'm wrong but are there two little vacuum valves on the right hand side guard (sitting in drivers seat) ?
Anyhow, the whole reason for this is to convert my 62 (petrol) into a 61 (turbo diesel)... the engine is in but the entire wiring loom has to be changed over including all the vacuum stuff, and i'm a little concerned cos there is absolutely no accurate information to be found (Ive even got the Toyota vacuum diagrams) !
Appreciate the pics you guys have put up, they have helped a lot, but I think I need more and it would be good to post them for others going through this problem aswell. So if you have any more could you either email or post thanks.
Posted: Mon Aug 13, 2007 1:55 am
by Tapage
In out 12H-T are much vaccum stuff to fit .. other view
I thought if you have specific stuff that you want to know .. maybe I can help.
Posted: Mon Aug 13, 2007 2:21 am
by KaMo
All of my 12HT photos are in this album:
http://s6.photobucket.com/albums/y215/k ... ndcruiser/
"landcruiser012.jpg" shows the two valves you are talking about behind the air cleaner but not in enough detail.
If you can tell us exactly what pics you want i can grab some for you tomorrow or on tueday as one of my mates has an import 60 with 12HT.
Cheers.
engine bay
Posted: Mon Aug 13, 2007 5:20 pm
by Cruza62
Great pics mate, I need a pic of the Right hand (sitting in drivers seat) guard. There should be two small vacuum solenoid things there, i just don't know what they do or what they look like
thanks
Posted: Thu Aug 16, 2007 12:53 pm
by KaMo
OKi doke...sorry it has taken so long...
I think these are the two solenoid things in question...the hose is tee'd off just below them and a single hose runs to the part shown in the 2nd photo.
Below is just an overall photo...I don't know what happened to the air cleaner...its well melted but.
They are possibly pressure switches for the operation of the on-boost and over-boost lights which are usually located in the tachometer...not too sure but? However they are fed with air from the intake cross-over pipe.
engine bay
Posted: Thu Aug 16, 2007 5:17 pm
by Cruza62
Awesome, thats exactly what i was after. Thanks for all your help.