Page 1 of 1

80 series dash bourd

Posted: Sat Aug 11, 2007 3:14 pm
by StuartL
I have a standard 80 series (91 model) and I am thinking of cutting a whole in the dash for the laptop so that I can run ozzie explorer etc.
The place that I am thinking of is on the passenger side directly behind the handle that is on the dash and above the glovebox, I thought the handle can stay and act as a support for the bottom section od the laptop.
My question is;
Is there any reason why I could not cut a compartment out from there, does the heater lines run that high up or is there anything else that anybody knows of which is behind there?

Thanks in advance.........Stuart.

Posted: Sat Aug 11, 2007 4:19 pm
by MissDrew
Pull the glove box etc out and have a look

Posted: Sat Aug 11, 2007 5:28 pm
by StuartL
I might have too, but I was hoping to learn from someone elses mistakes :cool:

Posted: Sun Aug 12, 2007 1:03 pm
by Tapage
If I remember well you have a empty space behind at least in LHD cruiser .. some wires and nothing really special .. but really there are not much free space anycasae ..

Posted: Mon Aug 13, 2007 6:20 pm
by StuartL
I had a look today and there is some minor wiring which can be moved but the main channels for the heater / vent run hard up against the dash so I might have to look for another option :cry:

Posted: Mon Aug 13, 2007 9:11 pm
by Chucky
Get a touchscreen and put the laptop under the seat.

I have a 7" touchscreen mounted in my double din space in my 80. runs to a computer under the seat. I use this for my navigation software and also for playing music. The wife finds it useful for saving her photos off the camera when out bush and burning them onto a disk. I have also mounted a camera on the rear and use it on teh touchscreen as well.

i have seen the fold out touchscreens go on ebay for only a couple hundred dollars if you dont want to loses both your radio spots.

Posted: Mon Aug 13, 2007 10:18 pm
by StuartL
I have my UHF in the other spot, but I suppose I could mount a smaller touch screen somwhere ;)

Posted: Mon Aug 13, 2007 11:15 pm
by Tapage
Never thought .. but it's a greet idea .. dude did you have a pic of your setup ?