Page 1 of 1

44"s on ifs!!!

Posted: Thu Jan 01, 2004 10:31 am
by twinnie
by now a few of you (and most of them being victorians) would know the truck i am speacking of the question is why? surly you would go though diffs and axels pritty quick. mabey its just a display truck like the one next to it. if any one is still mystafied i'm talking about the 4x4 heven hilux.

Matt

Posted: Thu Jan 01, 2004 11:18 am
by RUFF
PICS

Posted: Thu Jan 01, 2004 11:21 am
by twinnie
aaahh see i do have pics but they are on film and so i'll be finishing that film at the summer nats (i'm going to enter the photo comp) so they'll be a few weeks and by then ppl will have lost interist in this thread. :cry:

Matt

Posted: Thu Jan 01, 2004 11:40 am
by ausyota
Hmmm...
Id like to see how long the Idler arm in the poxy IFS steering holds up to a 44.

Posted: Thu Jan 01, 2004 9:11 pm
by bigsteve
I've seen it dirty b4 but never being driven, I thought they were smaller than 44's, I think they are Ground Hawgs aren't they??

Posted: Thu Jan 01, 2004 9:23 pm
by Surfection
Yeah they looked like 40 inch ground hawgs to me yesterday when we drove past on the highway....for 500 bucks why the hell wouldn't they throw a SAS under there :roll:

Posted: Thu Jan 01, 2004 9:29 pm
by RUFF
Surfection wrote:for 500 bucks why the hell wouldn't they throw a SAS under there :roll:



:roll: :roll:

Posted: Thu Jan 01, 2004 9:36 pm
by Surfection
RUFF wrote:
Surfection wrote:for 500 bucks why the hell wouldn't they throw a SAS under there :roll:



:roll: :roll:


Ummm yeah ??? They're a 4wd modification workshop..... 200 for the front axle, they've got the steering box right there already, tie rod/drag link wouldn't cost $hit, shocks $200 for NEW ones, cheaper for second handies, shock mounts out of scrap/cheap as chips plate/pipe, and 100 to get the shaft lengthened or they could make up a spacer for f&%k all. Some rear springs might set them back 50 bucks or whatever.

i don't see the problem !!

Posted: Thu Jan 01, 2004 9:39 pm
by RUFF
Surfection wrote:
RUFF wrote:
Surfection wrote:for 500 bucks why the hell wouldn't they throw a SAS under there :roll:



:roll: :roll:


Ummm yeah ??? They're a 4wd modification workshop..... 200 for the front axle, they've got the steering box right there already, tie rod/drag link wouldn't cost $hit, shocks $200 for NEW ones, cheaper for second handies, shock mounts out of scrap/cheap as chips plate/pipe, and 100 to get the shaft lengthened or they could make up a spacer for f&%k all. Some rear springs might set them back 50 bucks or whatever.

i don't see the problem !!


Nor did i before you did your surf.

Posted: Thu Jan 01, 2004 9:46 pm
by Surfection
:cry: Lets not go there.... if i had of listened to you and others and put leaves under it in the first place i would have been wheeling it for 2 years now. And dayum i'd have much less debt to worry about !! :lol:

Posted: Thu Jan 01, 2004 10:03 pm
by RUFF
Surfection wrote::cry: Lets not go there.... if i had of listened to you and others and put leaves under it in the first place i would have been wheeling it for 2 years now. And dayum i'd have much less debt to worry about !! :lol:


Now you know why i went :roll: :roll: :D

Posted: Thu Jan 01, 2004 10:05 pm
by RUFF
But i just hope we learn from our mistakes i know i have. I would never have touched my dual cab if i had planned to be where i am now with it. It prob owes me around 30Grand+ and i could build it now for around 10.

Posted: Thu Jan 01, 2004 10:13 pm
by Surfection
RUFF wrote:But i just hope we learn from our mistakes i know i have. I would never have touched my dual cab if i had planned to be where i am now with it. It prob owes me around 30Grand+ and i could build it now for around 10.


Ken oath dude... i'm with you all the way. Unfortunatly us young guys tend to not listen to those who obviously know better than us and insist on doing things our own way. :cry: I've learnt the hard way but i've definatly learned, the rangie is gonna be kept simple as and very low !! :)

Posted: Thu Jan 01, 2004 10:55 pm
by RaginRover
RUFF wrote:But i just hope we learn from our mistakes i know i have. I would never have touched my dual cab if i had planned to be where i am now with it. It prob owes me around 30Grand+ and i could build it now for around 10.


Out of interest mate did you get the 3.9 running well or are you still having timing issues ?

Tom

Posted: Thu Jan 01, 2004 11:21 pm
by RUFF
Yeah its Fine Tom the Vac Advance was RS. I just need to replace it.

Posted: Sat Jan 03, 2004 6:05 pm
by MAV-RIK
Ive seen this ute(4WD Heaven Hilux)close up and the tyres are 44/18.5/15's on what looks like 15x12in alloy rims.
I spoke to the guy in there and its powered by a 308 backed with a T700 4 speed trans and is for sale for around 26 large as is or 20 no wheels.Mav

44 ifs

Posted: Wed Jan 07, 2004 6:34 pm
by big38l
i think this is it.....

Posted: Wed Jan 07, 2004 8:23 pm
by Damo
MAV-RIK wrote:Ive seen this ute(4WD Heaven Hilux)close up and the tyres are 44/18.5/15's on what looks like 15x12in alloy rims.
I spoke to the guy in there and its powered by a 308 backed with a T700 4 speed trans and is for sale for around 26 large as is or 20 no wheels.Mav


$26k? oooh pick me! pick me!


:roll: