ok i have a 3F engine with a mechanical fuel pump.
The fuel pump has the usual inlet, outlet, and carby fuel outlet lines.
At the bottom of the fuel pump there are 2 holes on opposite sides of the pump. I assume these are breather holes. Well my pump started to shoot a fuel oil mixture out of these holes resulting in alot of swearing and thinking of a large bank account decrease, not to mention a shit load of oil and fuel on my driveway.
Here is the thing, it was fine when the standard carby was on it, and i have just put a holley 350 on it and while trying to tune it up this happend.
So here are my questions:
1) Is my fuel pump stuffed
2) Is it caused because of a different carby and if i put the original carby back on will it be ok
3) Is this a monumental engine f**k out
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fuel Pump
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 1 guest