Page 1 of 1

JT2 on 3in lifted GQ

Posted: Fri Aug 17, 2007 11:40 am
by jtraf
Got a set of 34x11.5 JT2 for the GQ......

It has 3in lift at the moment.......

As it is the wifes daily driver I have been advised no more lift.........

Now seeing the size of the tyre is close to 35 will radias arms spacers and extended bump stops make the tyres clear for offroad?

Looking for very little or no cutting and no more lift what are the options?

Posted: Fri Aug 17, 2007 12:36 pm
by CruiserPatrol
I had 34x10.5 jts on 2" lift and took off the standard flares to gain clearance. They only just touched the inner wheel well at the rear drivers side.I used cruiser offset rims to get them out further too.
The extra width may change things for you though.

dave

Re: JT2 on 3in lifted GQ

Posted: Fri Aug 17, 2007 1:04 pm
by bogged
jtraf wrote:Looking for very little or no cutting and no more lift what are the options?
dont listen to her!! Do a bodylift while she aint lookin.. 2 hours its done. ;)
my JT's were fine on the GQ but that was 4inch +30mm... still wiped on the inner guards :(

Image

Posted: Fri Aug 17, 2007 1:13 pm
by waxhead..
My old man's play rig is a GQ shorty with 3" spring, 2" body and 34" JT2's and they scrub.