2.4i mitsubishi turbo

[Racer-X]

hi guys

i am from South africa

we get a mitsubishi colt clubcab 2.4i 4x4.

how easy would it be to turbo this motor?

[Racer-X]

it is a 4 cylinder
2.4 litre
fuel injected

[blown26paj]

Hi racer-x i will give some theories here that as far as i know havent been tested the 2.4 engine if the same as the 2wd triton in aus is a sirus engine related to the 4g63 as in the early l200 2 litre also available in 1.8 in the mitsubishi lancer.Here is were i will throw you a line the 4g63t is the two litre version twin over head cam turbo charged,here is a few possible options 1st option would be to see if exhaust manifold is interchangable my gues is you would be lucky ? 2nd would be to see if the 2 litre head fits your block ? you would have to start with a head gasket from each and compare, 3rd look at hp & touque between the 2.4 and the 4g63t the last 2 options you should get away with the ecu from a 4g63t the next and easiest option would be that the paj was avilable in 2.4 turbo option as we have had a couple of these imported to aus maybe an option to import the manifold and ecu or after market ecu. THESE ARE ONLY THEORIES AS SUGGESTED IN THE FIRST LINE BUT I WOULD BE INTERESTED IN THE OUTCOME IF ANYONE CAN PROVE THEM WRONG GO FOR IT

[Lordtrunks]

Its poplular here to swap out the 4g63 for the 4g64(2.4) for the turbo guys here is a site that may help you out a bit.

http://www.projectzerog.com/