Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.6 sump issues
1.6 sump issues
ok ive done a search and havent found to much info on the sump change over when doing a 1.6 conversion. I was just wondering if most ppl just modify the oil pick up to fit the 1.3 sump or wat is need to use the vitara sump as in lift wise. any info be handy thanks
yeh u gota use the 1.3 sump and cut/shunt the 1.6 and 1.3 oil pickup.
u will also need to cut all or some of the baffels out of the sump.
Vit sump - about 3" lift with minimal compression i beleive
Mine are below.
1.3 sump and 1.6 + 1.3 oil pickup.
u will also need to cut all or some of the baffels out of the sump.
Vit sump - about 3" lift with minimal compression i beleive
Mine are below.
1.3 sump and 1.6 + 1.3 oil pickup.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
I take it that is a 16v due to the stud girdlenicbeer wrote:yeh u gota use the 1.3 sump and cut/shunt the 1.6 and 1.3 oil pickup.
u will also need to cut all or some of the baffels out of the sump.
Vit sump - about 3" lift with minimal compression i beleive
Mine are below.
1.3 sump and 1.6 + 1.3 oil pickup.
Who is online
Users browsing this forum: No registered users and 0 guests