Page 1 of 1
WTB: PTO unit for LT95
Posted: Wed Aug 22, 2007 12:24 pm
by 1103.9TD
G'day all,
I'm after a PTO unit to drive my Thomas winch via an LT95 gearbox/txcase, I'll take it with or without the shaft(s). Does anyone on forum know of, or have one of these, that they can spare?. Thanks.....
Posted: Wed Aug 22, 2007 11:08 pm
by andrew e
i think there was one on ebay a while back. If you find an overdrive while your looking send details my way.
Andy
Posted: Thu Aug 23, 2007 9:13 pm
by 1103.9TD
Always happy to help another Landy owner in need!, willdo......
Posted: Sat Aug 25, 2007 7:12 am
by nairbo
Will the PTO from a LT95 fit a LT230 ?
Posted: Sat Aug 25, 2007 10:47 pm
by 1103.9TD
In a word, 'no', unfortunately. I have a brand spanka ex MaxiDrive, that I'll now have to flog. I bought it prior to my LT85 failing
.
Posted: Sun Sep 02, 2007 6:46 pm
by Blown RR
i have one that you can have.
i sent you a pm.
Posted: Tue Jul 14, 2009 5:14 pm
by 1103.9TD
Bump, any more of these around?, I'm after one for a mate......
Posted: Tue Jul 14, 2009 5:16 pm
by Slunnie
These must be in demand. A fellow in NZ found me to buy mine.
Posted: Tue Jul 14, 2009 11:56 pm
by TimRover
We must have been lucky than, picked one up on ebay for i think it was $400 with everything including shafts, winch cradle, bullbar to suit pto, trans drive unit, actual winch and cable, all nuts and bolts etc
TIM.
Posted: Wed Jul 29, 2009 4:40 pm
by 1103.9TD
I've seen a couple in the paper up here over the past few years, but normally you've got to buy a Rangie with them
. If only they came with a TRB LT95......
Posted: Sat Jan 02, 2010 10:44 pm
by 1103.9TD
Bump........
Posted: Tue Jan 05, 2010 9:20 pm
by lokka
1103.9TD wrote:I've seen a couple in the paper up here over the past few years, but normally you've got to buy a Rangie with them
. If only they came with a TRB LT95......
Ya dont want much do ya
Posted: Tue Jan 05, 2010 9:56 pm
by PacMan
Hi all,
i am looking for a LT230 PTO-out (MaxiDrive is the only one so far i know).
Sorry 1103.9TD for high jacking.
Greetings
Chris
Posted: Wed Jan 06, 2010 1:37 am
by 1103.9TD
No worries, good luck.
Posted: Wed Mar 31, 2010 10:30 am
by 110county
Gday guys
Be careful when you are buying these pto's as the rangie and 110/stage1 versions are quite different, its very hard to fit a rangie one to a 110 without cutting the floor. Sure the gearbox is the same but the pto had different orientation and different distance between input and output centres. Think I have a pic somewhere of the two types next to each other if you're really keen.
Luke