Page 1 of 1
fitting 32x9.5 SImex pedes on 8 inch rim
Posted: Fri Aug 24, 2007 3:55 pm
by dank
i've current got 31x10.5 silvertstone tyres on 15x8 inch rims at the moment and I haven't had them pop a bead or anything even down to 10psi.
the simex 32x9.5 measure 10.5 inch in sectional width. Do you think I could get away with strapping these onto the 8 inch rims?
cheers
DAn
Posted: Fri Aug 24, 2007 4:18 pm
by Brainless
i have 33x12.5's on 15x8's aint a big issue but i havnt run them low psi yet either
Re: fitting 32x9.5 SImex pedes on 8 inch rim
Posted: Fri Aug 24, 2007 5:35 pm
by Jam-Pony
dank wrote:i've current got 31x10.5 silvertstone tyres on 15x8 inch rims at the moment and I haven't had them pop a bead or anything even down to 10psi.
the simex 32x9.5 measure 10.5 inch in sectional width. Do you think I could get away with strapping these onto the 8 inch rims?
cheers
DAn
Yeah i ran a set of 32x9.5 simex's on 15x8's and had no dramas what so ever.
Posted: Fri Aug 24, 2007 5:53 pm
by dank
being a rangy did you ever run them under 10psi? as thats what i'll be running them at....if they were around 16 to 20 i would get no bagging on the zook.....
Posted: Fri Aug 24, 2007 6:15 pm
by UrbanRedneck
Hey Dank if he can keep anything on the beads at even 16 on a rangie he is doin alright (remember the JTs 2 in one hit)
You shouldnt have a problem at lower pressure either simply because you dont have the wieght behind it if you hit anything the same as there isnt enough wieght to bag them.
But knowing how you drive
anything is possible
BTW looks like GQ diffs
Posted: Fri Aug 24, 2007 6:19 pm
by Jam-Pony
dank wrote:being a rangy did you ever run them under 10psi? as thats what i'll be running them at....if they were around 16 to 20 i would get no bagging on the zook.....
I didn't run them on my rangie, i ran them on my troopy and yeah i was running them pretty low on the beach with out beadlockers so i don't think you should have a problem.