Outer Limits 4x4 Board

id love to know how you guys have mounted internals into ln65s etc. without removing the seatbelt. no matter how i look at it it has to go. unless i lean the whole B hoop toward the back from infront of the belt and i really dont like this at all. i dont want to squash the pipe to fit by, i dont want to bend it to fit past.

this is getting made from 32 NB pipe, for safety only, not comps... the car is a basher and i just want extra protection.

thanx anyone

I have seen one in a hilux that had a tab off the b pillar accross the seat belt hole so that the seat belt bolted through the tab as well as the body most cages the seat belts mount on the cage anyway...might be able to get pics if you need some.

i mainly want to keep it as legal as possible...... kinda. so yeah, ill have to talk to engineer i guess, i never thought of moving the tensioner.

Any roll cage has to be engineered for street use well in nsw it does.

Qld it ha to be plated but you know that maybe call a few places that do cages and ask them for a way around it.

in vic..

as long as the vic roads guidlines are followed to the letter then you dont need to engineer it.

however this includes that the cage must not me mounted using existing seat belt mounts and that the seatbelts are not changed or itefered with in any way.

Here are some pics of the AllPro cage kit. You need to bend the bottom section of the tube inwards towards the tunnel to clear the seatbelt.

im not to familar with the models, but in my lux, i mounted the main hoop behind the seatbelts. Mainly becasue of my seating position in the car. Its a dual cab too, so had a bit of room in the back