Outer Limits 4x4 Board

G'day all, my name is Steve,
I have a problem with my 89/90 fj62 Landcruiser auto! the transfer case and the auto transmission are leaking into each other, I'm going to put a kit through the transfer case. I wanted to ask if anyone has done this job before and if there is anything i should look out for ... will i need a press, any special tools or technique's. I don't intend to tear it down any more then i need to, in less there is something is should pay particular attention to while I'm in there!

Any ideas would be greatly appreciated, thankyou Steve.

You refeer to the seal between tranny and t-case .?

you can split the t-case pull hoy all gears and replace the seal .. long hours job but not really dificult ..