Page 1 of 1
Chasing a 1.3 clutch alignment tool Sydney
Posted: Thu Aug 30, 2007 3:28 pm
by Brendan-s
As per topic, I'm in need of a clutch alignment tool to suit a 1.3L in Sydney. Anyone got one they want to rent out for a six pack, or conversely where do you buy them from?
Posted: Thu Aug 30, 2007 3:29 pm
by fool_injected
use the force Luke
Never used one before I just use my precision fingers to gauge the gap betwwen plate and clutch.
Posted: Thu Aug 30, 2007 3:34 pm
by =SKB=
Big flat head screwdriver with electrical tape wrapped round the blade. Works fine.
Posted: Thu Aug 30, 2007 3:37 pm
by j-top paj
fool_injected wrote:
Never used one before I just use my precision fingers to gauge the gap betwwen plate and clutch
x2
Posted: Thu Aug 30, 2007 3:40 pm
by j-top paj
fool_injected wrote:
Never used one before I just use my precision fingers to gauge the gap betwwen plate and clutch
x2
Posted: Thu Aug 30, 2007 4:02 pm
by muppet_man67
otherwise find something the same size as your spigot bearing. Ie a pencil then find a socket the same size as the splines make them into a tool, I found toilet paper works well for stuffing around the pencil to keep it centered in the splines.
Posted: Thu Aug 30, 2007 4:38 pm
by Brendan-s
cool, will do guys. save me the $$$ in buying one. cheers.
Posted: Thu Aug 30, 2007 10:27 pm
by lay80n
4130warrior wrote:cool, will do guys. save me the $$$ in buying one. cheers.
As said, just use your eye, and the force. I have not used a clutch alignment tool since about 2nd year of my apprenticeship. Or, pay me what you would of spent on a tool, and some beer, and i will align it for you
Layto....
Posted: Fri Aug 31, 2007 10:59 am
by Liam
I have a proper one, come and pick it up.