Towing Motor

[PSI-EFI]

hey all, we own a 80 series 4.5 litre 4wd auto and we do allot of towing, our boat weighs 3+ tonnes and we find that the cruiser just struggles too much. We want to convert our car and put a v8 inside but were having trouble deciding whats the best v8, We need a motor with lots of torque that will pull our boat in far travel without too much of an issue and we also need info on the gearbox, diff, transfercase adapters, etc.... and we also want to run it on straight gas. at first we were gonna buy a 502CI but that was too much money, then we were gonna get a 427CI, and then we were told to go a 400CI, so were kinda lost, any help would be awesome.

[Struth]

Chev 6.5Lt diesal V8.
www.marksadaptors.com.au

Cheers

[PSI-EFI]

cheers for the first comment, but were trying to avoid the diesels because we wanna run straight gas, thnx ny way thnx 4 the site aswell

[Spartacus]

if its the 1FZ-Fe EFI 4.5 then turbocharge it

if it the early carb then boot it and get a hemi

marks adapter is the go seriously

[PSI-EFI]

thnx 4 the comment, we actully called this morning because he seemed like a bloke that knows what his doing, but we called at 8 which was too early, so 2morro my dad will call and see whats going on, nah we wouldnt wanna put forced air induction, we would prefer to have it n/a with a big v8.. thnx boys

[Tapage]

I thought ( and I'm a Toyota purist and lover ) your best bet it could a big V8 like a Chevy or Cummings ..

Fit a 6BT and you will be done for lots of towing .. and really heavy if you want ..

Could boost it over a 22 PSI and make a really tough towing car ..

[PSI-EFI]

thnx for the comment, we called Marks 4wd today and he rocomended that we fit a 454 BB with gen6 block. the motor has 390 hp and 595 ft/pounds torque. With the adapter it is going to bolt stright onto the old bell housing, and we also called desert cool radiators and we will run a custom made 2 core 26mm radiator with twin 16" thermo fans.

[bad_religion_au]

#shakes head#

a nice supercharger or low boost turbo on straight gas would put you pretty close to the BB and be easier, less of a head f#ck, and probably more reliable (there's a 1fzfe here in adelaide that runs 25psi on stock internals and only had issues with the head studs stretching. ARP fixed that for him)

[PSI-EFI]

sorry about my ignorance, but how would i achieve torque with the same engine, i was under the impression that a supercharger would increase the hp and not the torque which is what were mainly after

[chunderlicious]

power is actually a load of shit... torque is what makes power. to get the power of a car from a dyno it actually calculates some equation which give power.

[bad_religion_au]

sorry about my ignorance, but how would i achieve torque with the same engine, i was under the impression that a supercharger would increase the hp and not the torque which is what were mainly after

ummm ok...

considering HP is simply torque multiplied by revs, the most effective way to up the HP is to increase the torque...

a well ballanced, well designed forced induction 6 will give you heaps of low down torque. as they are long stroke

[302 cruiser]

get a 351 cleveland and stroke it they are great for towing as they were origonaly designed as a truck engine and the get realy good km to the litre on gas when towing