Page 1 of 1

split case trasfere

Posted: Fri Aug 31, 2007 6:32 am
by 75 cruser
are all the 60 series and 75 series 5 speed gear box and split case transferes the same and are thier any diffrent model numbers etc

thanks rob

Posted: Fri Aug 31, 2007 5:13 pm
by bad_religion_au
nope.

go to www.ih8mud.com, look in the tech links for the toyota FAQ and it should have some info in there.

there were 2 different low range ratio's, 2 different input shaft spline counts, plus i think the later 75 series used the R150F or H150F, where the earlier ones used h55Fs... but that's all off the top of my head, so feel free to correct

Posted: Sat Sep 01, 2007 2:10 am
by Tapage
You have plenty options ..

In 60 only the H55F but that come with to ration inside the BF1A t-case ( split ) 1.968:1 and 2.278:1

In 75 series you have the ( with 1HZ engines only engine available here for 75 series ) H151 option that here in Panama only come with a splitcase but 2.48:1 low range.

Posted: Sun Sep 02, 2007 5:14 pm
by 75 cruser
my 86 model cruiser has a h55f plate on the fire wall with the 2h diesel amd 5 speed, that was i was thinking that it was the same as a 60 as they came out with the h55f

thanks rob