Outer Limits 4x4 Board

has any one put rose joints on the end of the pan arm rods?

I was thinking of putting rose joints on the trailing arms on the rear to find some more travel !
or will this make the ass end too floaty ?

series 3 on gu have a spherical bearing on the chassis end of the pan hard rod standard, I doubt that there is any suspension travel to be gained in the rear with rose joints usually its the shocks or tyres burried into the rear inner gaurd stopping it

Have run rodends all round and found no gain from standard Nissan rubber bushes. Just keep with the Nissan gear and if you want more, run longer arms and longer shocks ect. Running the rodends we found they transmitted road noise and vibs from diff to chassis.
Cheezy

being its a patrol stick to standard rear abd worry bout making the front travel