Exhaust flex leaking??
Posted: Sun Sep 02, 2007 8:45 pm
Got an 80 series 1HZ that is hurting for power. Yeah yeah, whats new.. Its the only one I've ever had, and only had it a few months so can't really compare it to anything, but driving home from the mountains today it was positively dangerous. Flattened to the floor for as long as the road would last in a straight line, GPS verified 108km/h. Now to me, that sounds a bit sick...
31" standard road tires on it, 2" lift, roof rack empty, 3 people on board with a weekend of ski gear (not a great deal, all inside) and a half fuel load. 108 is not a healthy figure is it? No more smoke than any other 80, cruise control had the accelerator pinned to the carpet to do 104, guages all read normal, 3.5" tube snorkel facing rearwards, and the only thing that seems slightly amiss is the flex join at the drivers front wheel on the exhaust.
I've never had a drama with these before, never paid them much mind, but at idle you can feel it blowing on your hand, so I assume it would be howling at full revs. Speaking of full rev's, short of butchering the engine, I couldn't get it past 3000rpm.
Would a leaking bit of flex, combined with the standard exhaust manifold and crimped exhaust, be enough to give me this problem??
cheers
31" standard road tires on it, 2" lift, roof rack empty, 3 people on board with a weekend of ski gear (not a great deal, all inside) and a half fuel load. 108 is not a healthy figure is it? No more smoke than any other 80, cruise control had the accelerator pinned to the carpet to do 104, guages all read normal, 3.5" tube snorkel facing rearwards, and the only thing that seems slightly amiss is the flex join at the drivers front wheel on the exhaust.
I've never had a drama with these before, never paid them much mind, but at idle you can feel it blowing on your hand, so I assume it would be howling at full revs. Speaking of full rev's, short of butchering the engine, I couldn't get it past 3000rpm.
Would a leaking bit of flex, combined with the standard exhaust manifold and crimped exhaust, be enough to give me this problem??
cheers