Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fiber gears in 3f

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 35
Joined: Fri Feb 18, 2005 2:31 pm
Location: WA

Fiber gears in 3f

Post by outlandy »

does anyone know of any failures in the fiber camshaft gears. I know that red holden motors have em and they are prone to failure around 60000km I just dont want to be ringing the RAC from halfway up a dirty great big hill
Posts: 46
Joined: Mon Jun 04, 2007 11:25 am
Location: Alexandra Hills

Post by mac85 »

I have over 300,000 on my 3F engine in a 1985 FJ62 Wagon. Never any problem with the camshaft gears.
1985 FJ62 2" lift
2001 HJZ105 3" lift & locked
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

i thought they were all steel?
480kms on mine.....
Posts: 35
Joined: Fri Feb 18, 2005 2:31 pm
Location: WA

Post by outlandy »

Mine has 200000 and the old man's has 300000 and havent had any troubles but didnt realise they werent steel untill I replaced the timing cover gasket and found the fiber gears. they were trouble in holdens but the japs may have got it right
Im not bogged I am just momentarily challenged
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest