Page 1 of 1

TD42 Injector pump mods

Posted: Wed Sep 05, 2007 7:19 am
by Xtreme4x4
I have fitted the AXT extreme series turbo kit to my SWB GQ It runs well on the road but lacks power on the dunes.I cant seem to get enough fuel (have turned fuel screw in more but dose not make a difference)I had the pump rebuilt with a different swash plate to get a quicker response but have been told to get bigger plungers.
My question is,dose anyone have any tech info on what to look for eg.part no's or what other pump to use ?These types of mods are not done here and no one is keen to assist so i must get as much info as possible to assist the diesel pump guy's.
I am bringing my shorty over in 2008 for the OBC and would like to get as much work done befor the car leaves in Feb.2008.I won't have enough time to sort this out over there.

The work already done to the motor is;a new cylinder head fitted (ported and 3 angle valve job),ceramic coated valves and piston crowns:pistons ,rods and crank were balanced;extractor was ceramic coated inside and out;AXT turbo and water/air intercooler fitted and a 3" exhaust fitted.I am getting about 130kw and 400nm out now with egt's of +-500c when pushing realy hard.How do I get MORE????????????????
Any help Pleeeez
Dennis