Hi
I'm toying around with the following:
http://www.outerlimits4x4.com/phpBB2/vi ... p?t=118813
Anyway, might be onto getting a 3B engine (not quite a 15B I know), and a matching H55f gearbox with transfer.
Current plan is to mate the Hilux gear driven transfer to the Cruiser 5 speed gearbox, that way we get the 3B engine, strong box, already aligned transfer, and the standard Hilux Diffs. I see on the Martin crawler site they have done a kit to fit the Hilux reduction box in between the Cruiser box and transfer, so to my mind it can be done!
Questions:
- H55f output: Spline count, shaft diamter, length, any detail please.
- Lux Transfer: Intake spline, shaft, detail etc.
- Anyone done this? If so any advice/info would be brilliant.
- Also, Hilux transfer should be strong enough, shouldn't it?
Any info advice appreciated,
Thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cruiser & Lux Splines
Moderators: toaddog, Elmo, DUDELUX
Cruiser & Lux Splines
Wheeling on completely wicked angles, without even looking stable.
Who is online
Users browsing this forum: No registered users and 1 guest