Outer Limits 4x4 Board

well I've finished putting in my centreforce clutch should be off wheeling now ... wrong

I have been try to adjust the clutch but now for some strange reason its working in the opposite of what its spose to (when in gear push the clutch in an it moves , let it go an it will stop) ... is this just some adjustment thing ... over tighten maybe

also are centre force clutches noisy? it makes a niose sometimes when you compress it the thought is its the centrifugal wieght system .. or have i just shagged my new throw out bearing

any guidance or ideas ... anything would be great
cheers
ofr57

the plate could be the wrong way around

bump

stupid question, but have you put everything back on properly? didnt find a few spare bolts laying about when ya finnished that werent there when ya started?




have you got a cable or hydrolic clutch?

cable clutch ... suzuki serria

maybe ... I did it in the shed an theres always bolts an carp on the floor

boner59 wrote:the plate could be the wrong way around

This would be my guess too. On the clutch plate, you want the more elevated side to be away from the flywheel, so its sitting inside the pressure plate.