Page 1 of 1
gear boot.. twin sticks?
Posted: Mon Sep 10, 2007 9:19 pm
by Red_Zook
hey all
looking for a boot for my transfer levers.. it will be twin stick.. and dont realy wana chop one and looks shit..
im thinkg 2X thin ones? mounted side by side...
or somthing?
any one got any ideas?
Posted: Mon Sep 10, 2007 9:23 pm
by cloughy
Through the one hole?? I just got a local trimmer to sew one up out of vinyl, cost fark all and worked well
Posted: Mon Sep 10, 2007 10:06 pm
by Red_Zook
cloughy wrote:Through the one hole?? I just got a local trimmer to sew one up out of vinyl, cost fark all and worked well
yeah that sounds cool...
i m thinking of finding a boot from a cruser or something that has all the transfer gears in one straight line...
i think middi's do?
2 of those butted together??
im also trying to make my interia look as bling and micky mouse as posible...
every little bit helps
Posted: Tue Sep 11, 2007 2:56 pm
by Hekta
cloughy wrote:Through the one hole?? I just got a local trimmer to sew one up out of vinyl, cost fark all and worked well
X2 that's what I did.
Posted: Tue Sep 11, 2007 3:44 pm
by cj
Posted: Tue Sep 11, 2007 9:40 pm
by mattc
If you want a twin stick rubber boot, try Marathon Spares near Tamworth - they do old CJ repo parts and I bought a CJ2/3 twin stick rubber boot new from them.
Posted: Tue Sep 11, 2007 10:15 pm
by Bentzook
Posted: Wed Sep 12, 2007 9:05 am
by Ezookiel
pardon my ignorance, but i'd assumed one was for the transfer case, and one for the gears themselves, but that link clearly shows it's TWO sticks for the transfer case PLUS the gear shift lever?
What's with the two sticks? One for high range, one for low range?
This is one of those many occassions when I just don't get it?
Posted: Wed Sep 12, 2007 9:28 am
by noelb1
Ezookiel wrote:
pardon my ignorance, but i'd assumed one was for the transfer case, and one for the gears themselves, but that link clearly shows it's TWO sticks for the transfer case PLUS the gear shift lever?
What's with the two sticks? One for high range, one for low range?
This is one of those many occassions when I just don't get it?
twinn transfer cases , bolted together eithe vit/sierra or 2 x lux or patrol. gives a hell of alot of gear reduction.
Posted: Wed Sep 12, 2007 9:52 am
by moose
you can twin stick a single sierra transfer case !!
1 lever does 2wd & 4wd !
the other lever does High & Low !
so you can do rear digs in low range !!
Posted: Wed Sep 12, 2007 10:02 am
by cj
moose wrote:you can twin stick a single sierra transfer case !!
1 lever does 2wd & 4wd !
the other lever does High & Low !
so you can do rear digs in low range !!
We have a winner
I'll be doing it to my Vit t-case shortly too. Those t-case boots from Rockrat are out of stock for a couple more weeks
but they "should" work for me with a minor mod apparently.
