Page 1 of 1
tie rod end
Posted: Tue Sep 11, 2007 5:06 pm
by thunder
i have a aftermarket tie rod(stronger).the one that is behind the diff from tyre to tyre,
Q is where did the ends come from.
took a broken one to nissan to parts..but they need a part number or what model and where it comes from..
i thought maybe its the same as a panhard end but there is 2 different part numbers for them.
it screws on to the end(male)
guessing its something with a GQ model
Re: tie rod end
Posted: Wed Sep 12, 2007 2:53 pm
by Guy
thunder wrote:i have a aftermarket tie rod(stronger).the one that is behind the diff from tyre to tyre,
Q is where did the ends come from.
took a broken one to nissan to parts..but they need a part number or what model and where it comes from..
i thought maybe its the same as a panhard end but there is 2 different part numbers for them.
it screws on to the end(male)
guessing its something with a GQ model
MQ utes had huge TRE's from memory
Posted: Wed Sep 12, 2007 3:44 pm
by MUD CLUB
left and right have different threads dont go to nissan they dont know a thing talk to any of the aftermarket boys eg 3rds bbm or even
snake if you have to just ring around
Posted: Wed Sep 12, 2007 5:15 pm
by cooki_monsta
didnt catch where you are from, i just got a snake racing draglink and it has the same ends you are chasing, i guess if u call them they will ship you one or if you are in melbourne you can give mel leslie a call as he makes them.
Posted: Wed Sep 12, 2007 5:29 pm
by thunder
im gunna check with a mate on saturday.. he has brought some for $30
Posted: Thu Sep 13, 2007 6:27 pm
by rover1
do they look like this
part number's TE135L and TE135R
Posted: Thu Sep 13, 2007 6:57 pm
by thunder
rover1 wrote:do they look like this
part number's TE135L and TE135R
nope thats female.
but just checked with the mate and his come in the same box.
he said there are left and right so ill check his ones and then buy whats right but now it wont be from nissan.
Posted: Thu Sep 13, 2007 8:02 pm
by rover1
Posted: Sat Sep 15, 2007 4:10 pm
by thunder
GQ ones dont fit..they are 22mm and mine is 20mm
but getting it off i f@@@@@ both of them
i will re tap the rod to 22mm. when i get the shits i break stuff
Posted: Sat Sep 15, 2007 5:04 pm
by Cheezy4x4
OK
GU 20mmx1.5 pitch small taper
GQ 22mmx1.5 pitch larger taper
MQ 25mmx1.5 pitch same taper as GQ but getting harder to get.
I had a taper ream made that is MQ/GQ so I can taper ream a GU nuckle and pitman arm to take MQ/GQ tierod ends.
Cheezy
Posted: Sat Sep 15, 2007 5:58 pm
by simcoe
ok so where's the best place to get replacement tie rod ends for a gu? cos mine are shagged as well!
thanks