Page 1 of 1
RD70/71 H260 Air Locker Tech
Posted: Thu Sep 13, 2007 9:39 pm
by bubs
Answer down a few posts:
Does any body know wether ARB's D60 RD35/36 35 spline side gears will interchange with a H260 RD70 37 spline side gears.
I am hoping seeing as they are similar sized diffs ARB would have get the side gears as close to a common part as possible?
Much like the H233 RD78A and L/C RD33 side gears.
Or who should I call to ask such a technical question.
Buddy
Posted: Fri Sep 14, 2007 11:31 am
by bazzle
sales@arb.com.au
They will pass on your QQ's
Bazzle
Posted: Fri Sep 14, 2007 11:51 am
by RAY185
Call head office at Nundah and ask for one of the sales guys called Greg. He's always been able to get me an answer on tech questions and is a great person to deal with.
ARB Qld State Office
615 Nudgee Rd
Nundah QLD 4012
Tel: (07) 3266 3255
Posted: Sat Sep 15, 2007 3:41 am
by Tapage
If you get the answer .. please post here just to increase de DB
Posted: Mon Sep 17, 2007 10:44 am
by bubs
Have had a great discussion with an engineer at ARB
Now the RD35/36 Dana 60 side gears wont direct interchange in to a RD70/71 H260 air locker
However RD37 Ford Sterling 35 spline side gears will, these are 1.5" 35 Spline but are a different pressure angle to Spicer shafts.
It may be possible to use the RD35/36 side gears with some modifications. But it is not guaranteed. I will personally need to look into this, but we are both confident it can be done.
Buddy
Posted: Tue Sep 18, 2007 1:05 am
by Tapage
Resume the idea it's ..
Hoy have a H260 35 splines rear diff .?
And the RD70/71 does not have the 35 splines side gears .. ?
Posted: Tue Sep 18, 2007 8:15 am
by bubs
Tapage wrote:Resume the idea it's ..
Hoy have a H260 35 splines rear diff .?
And the RD70/71 does not have the 35 splines side gears .. ?
\
????
Posted: Tue Sep 18, 2007 11:33 pm
by Tapage
Just try to figure what it's the final target of the investigation .. ?
Posted: Wed Sep 19, 2007 7:32 am
by dumbdunce
Bubs sorry I came in late, did you speak to Daniel Bongard? he is an engineer at ARB and is on this BB (user dbongard I think), he's the air locker man.
cheers
DD
Posted: Wed Sep 19, 2007 8:36 am
by bubs
dumbdunce wrote:Bubs sorry I came in late, did you speak to Daniel Bongard? he is an engineer at ARB and is on this BB (user dbongard I think), he's the air locker man.
cheers
DD
Yes he certainly knows his lockers
