Page 1 of 1
Diff Question
Posted: Fri Sep 14, 2007 8:38 pm
by mercury6
How hard is it to remove and refit the front diff in a 60 series?
Do I just need to replace the open centre? What changes need to be made whe going from stock to an lsd?
Previous owner has done filler plug up so tight.... nearly broke myself trying to get it open??
Any other ideas most welcome
Posted: Sat Sep 15, 2007 3:53 am
by Tapage
No mayor deal ..
Out the inners ( course the huge job of the knucles and keep it closet if aren't time to rebuild ) and all bolts of the 3rd member.
The LSD it's a factory Toy .? bolt on .. ( you have the complete carrier ? )
Diff Question
Posted: Sat Sep 15, 2007 3:37 pm
by mercury6
still unable to get the filler plug out, on the wrong side just to be able to change diff centre, what are my chances of drilling a new hole into the case????
Or how else can I get the filler plug out?
Re: Diff Question
Posted: Sun Sep 16, 2007 9:50 am
by 410sierra
mercury6 wrote:still unable to get the filler plug out, on the wrong side just to be able to change diff centre, what are my chances of drilling a new hole into the case????
Or how else can I get the filler plug out?
You could weld a nut onto the plug, worked for me