Outer Limits 4x4 Board

Posted: **Sat Sep 15, 2007 7:04 pm**

When you upgrade GQ coils and shocks, the coils are larger over all diameter
and the shocks (usually) are also bigger..............has anyone found a way to stop the
two coming into contact with eachother..??

I have Dobinson coils and the OME shocks 'bit the dust'.

New shock now in place......ready to be 'eaten' by the coil when articulating.....

Posted: **Sat Sep 15, 2007 7:31 pm**

Yer, pop in and see me.

Posted: **Sat Sep 15, 2007 7:35 pm**

OK .... thanks

Posted: **Sat Sep 15, 2007 9:27 pm**

Can you tell me how to fix as i have the same problem. Thanks for your help.

Posted: **Sat Sep 15, 2007 9:31 pm**

I had the same issue with Lovell coils and dobsion shocks ended up spacing out the bottom shock mount.

Posted: **Sat Sep 15, 2007 9:34 pm**

adjustable arms to bring the lower length and or upper length to what it should be for the correct pinion angle.

Posted: **Sat Sep 15, 2007 9:41 pm**

adjustable arms to bring the lower length and or upper length to what it should be for the correct pinion angle

This sounds like a plan........will try it out.

Posted: **Sat Sep 15, 2007 10:25 pm**

Yep longer lower arms, and maybe a small shock spacer if needed.
Cheezy

Outer Limits 4x4 Board

GQ rear shock/coil contact...Q.??

GQ rear shock/coil contact...Q.??