Page 1 of 1

What would it take to fit 280/85 16(900mm diameter)

Posted: Wed Jan 07, 2004 8:22 pm
by Jonathan Ferguson
Silverstone MT 117?

Would 2" Back Space 16x8 Rims be enough to keep the Tyre from the Relay Rod?
Would cutting just the Lip from the front Guards be enough?
How much cutting in the rear Guards?
What else?

Posted: Thu Jan 08, 2004 12:25 pm
by ORSM45
how much lift do you have?
should be alright but if you still need more just play around with the bolts that adjust your steering stops on the back of the hub.

Posted: Thu Jan 08, 2004 4:04 pm
by Jonathan Ferguson
how much lift do you have?
None

Posted: Thu Jan 08, 2004 8:47 pm
by ORSM45
ok, i put 35s on std had a fair bit of rub when pulling outta steep driveways, and all i did was 2 inch bodylift and it was fine. the front guards should give you bout 2.5 inchs if you cut them but the rear will need alot more than that. a mate could fit 36 swampers he had 2 inch spring 2 inch body. if thats any help to ya.
MaccA