Page 1 of 1
Rancho in cab air pressures
Posted: Wed Sep 19, 2007 5:49 pm
by LAIN_63
Just a quick one,
I have killed a rancho compressor and was wondering if anyone knows what psi the shocks run at full pressure. I am planning on using my locker
pump but not sure if 100psi will do it.
Cheers
Lain
Posted: Wed Sep 19, 2007 9:27 pm
by BASSYK
i have pulled apart one of the incab compressors and they are very similar to the ARB Locker only compressors which only pump up to 100 PSI
Posted: Wed Sep 19, 2007 10:08 pm
by udm
i was once told by 4waysuspension that they run at about 150psi, i wouldnt have a clue if its true though.
Posted: Thu Sep 20, 2007 7:25 pm
by LAIN_63
Cheers for the help.
I rang up 4wd1 today and they told me that 100 pound would be way too much.
think I might just have to put a guage in line with the ranco ones and see what the equivilent psi is when it says "9" on the incab
Cheers
Lain
Posted: Thu Sep 20, 2007 7:32 pm
by udm
ok then... and dont forget to let us know the pressures it works at
