Outer Limits 4x4 Board

any ideas on extended diff breathers for an 80 on the cheap??

Unscrew one of your diff breathers and take it in to ENZED and tell them you want that thread type to a hose fitting. You can buy the hose from them aswell. I just did mine 4 fittings ( I did my gearbox and transfere aswell) I think all up it cost me around $40 bucks with zip ties. I got brass fittings so they don't rust. Refit the original diff breather to the end of the hose. I have mine mounted high up in egine bay and the rear up ine side of my tray.Hope this helps...

cheers for that mate, do you know if theres a maximum length you can go on the diffs as i have an 80 series wagon and would probably run the rear diff breather into the engine bay aswell?

no probs taking it into the engine bay mate

surfseller06 wrote:Unscrew one of your diff breathers and take it in to ENZED and tell them you want that thread type to a hose fitting. You can buy the hose from them aswell.

yea go Enzed, never had any probs with them.......oh wait....I own local Enzed.....

just use 1/4 inch fuel hose with hose clamps cost bout 10 bucks

fullmetaljacket wrote:

surfseller06 wrote:Unscrew one of your diff breathers and take it in to ENZED and tell them you want that thread type to a hose fitting. You can buy the hose from them aswell.

yea go Enzed, never had any probs with them.......oh wait....I own local Enzed.....

Where in Vic is your store ?

love_mud wrote: Where in Vic is your store ?

mildura/swan hill

for the hose I'd go with some 3/8 plastic air hose from a truck parts supplier, cheaper than fuel line and will last longer (wont perish as quickly)