Page 1 of 1
No idea... (engine problem)
Posted: Fri Sep 21, 2007 4:08 pm
by Dooley
The zook sounded really nasty but no idea what's wrong with it, thought maybe someone else might've had this.
It was making a banging metallic noise, like bashing a tin can.
You could hear it slowly at idle, it got faster up to about 3000rpm then fades away and then gets worse again.
With the sump off, can't see any carnage, bearing and crankshaft all look okay.
Worth taking the head off to check skirts ?
Any ideas ?
Posted: Fri Sep 21, 2007 4:48 pm
by nicbeer
sounds like ur big end bearings have gone. but could have dropped a ring or skirt off and banging up inside there?
how do ur plugs look? and power gone down also?
Nic
Posted: Fri Sep 21, 2007 4:58 pm
by Dooley
Well big ends are fine.
Probably gonna take the head off.
Should check the plugs now that I think about it.
I guess you could say power went down, kinda lurched straight after the noise started... ouch...
edit:
Plugs are all a little bit carboned up, all the same condition.
Posted: Fri Sep 21, 2007 9:31 pm
by Dooley
Okay well it was big end.
Looked at a few and they were in perfect nick so assumed it wasn't that.
1, 2 and 3 were all in great condition... 4 was absolutely stuffed.
It's been apart before so guessing someone made a mistake.
Well thanks for your help, now it's time to decide what to do with it.
Posted: Fri Sep 21, 2007 9:43 pm
by nicbeer
sounds exact as mine did
time for the 1.6
Posted: Sat Sep 29, 2007 8:36 pm
by FLUFFY
damn i belive i hav the same prob with my 1.6 vit hmm
iv had that in mind for a while but to scared to pull it down?
Dooley.....was there much damage inside crank /rods
whats your plan of attack?
is the sump hard to get off with the motor in ?
btw first post here....hi all