Outer Limits 4x4 Board

i went to move my 60 today, and when i put my foot on the clutch it went straight to the floor, no resistance what so ever.

when the car is stationary i can select gears by mashing the stick, and it will start in gear and move the car, but still not clutch.

can anyone please help me shed some light on this and a possible solution

Pyro

Checked clutch fluid? If its full get someone to press the clutch pedal while you watch to see if the clutch slave is moving the fork. Might need a bleed but chances are you have a leak so you will have to replace master or slave or both. Not expensive anyway and very easy to do.

RAY185 wrote:Checked clutch fluid? If its full get someone to press the clutch pedal while you watch to see if the clutch slave is moving the fork. Might need a bleed but chances are you have a leak so you will have to replace master or slave or both. Not expensive anyway and very easy to do.

Yep. What he said.

Bleed the system .. but I wil replace both just for peace of mind .. easy job anycase ..

hey guys thanks for you help.

i bled the system last night, but still have nothing at the pedel, so i will be replaceing both as soon as i get a free moment

same thing recently. The piston in the master had rusted fixed to the far end of the cylinder, from not being used for ages.

new master and all good.