Outer Limits 4x4 Board

Posted: **Fri Jan 09, 2004 11:07 am**

seen some and have good measurements for rancho 9000 shocks front should be no prob similair dimensions 250mm compressed and 350 mm extended.
rear are 360mm compressed and 490mm extended but these are eye to pin and my rear fitting s are eye to eye ,
i know some companies make eye to pin adaptors but do rancho?

their office is closed till monday and other places cant find a part number to see if some are available.

any ideas?

oh yeah the shocks are cheap

Posted: **Fri Jan 09, 2004 11:44 am**

What about something like the rs99118 shocks they are eye to eye and run 361mm compressed and 561mm open

I know that there are eye to pin converters but i dont know about pin to eye

Posted: **Fri Jan 09, 2004 11:51 am**

http://www.gorancho.com/documents03/03_ ... pecs_1.pdf racnho shock lengths and specs

Posted: **Fri Jan 09, 2004 11:52 am**

Superior Engineering do both eye to pin and pin to eye converters but you have to realize this will change the compressed length and the fully open length of the shock.
http://www.superiorengineering.com.au

Posted: **Fri Jan 09, 2004 3:04 pm**

will check it out
if i cant use these shocks i have other new shocks to look at. :cool:

Outer Limits 4x4 Board

rancho pajero shocks on a navara

rancho pajero shocks on a navara