Outer Limits 4x4 Board

hey guys anyone out there using the mrt chip or cam or exhaust or pod filter?
looking for fedback on these parts.

care to share the vehicle type ?

I'm guessing a Roza... Rockys dont have a chip And in the other post he wanted to know if an applause cam makes difference to a Feroza.

But yeh, it's better if you state what you have, including any relevant mods, first up.

Somehow I always get screwed up remembering if a US rocky is a Feroza etc etc.

Wish Daihatsu had been consistent in their names across the world.....

rocky or feroza is the vehicle type. u.s. 1990 se model

i hoped to talk to someone who is running the whole sytem see if its worth getting. its kinda 'spensive. i want the header for sure though. a local shop could weld some straights and mandrel bend for mt for the rest of the system.

thanks in advance

Just FYI, in many parts of the world a Rocky is a different vehicle to a Feroza. Its always worth spelling it out IMO otherwise you might get very confusing advice.

Have a look at www.warfs.org and they explain things much better than I can. And there's free PDF manuals, which I suggest you download if you are really into your Rocky/Feroza....

for the money you'll spend on the mrts, it would likely work out about the same to go to an exhaust shop and have them fab you up a set of headers that are 4-2-1 flow for more bottom end grunt. or order lukey, which is the 4-1 flow.

i ordered hurrnicanes which are 4-2-1 flow but were made for right hand drive. couldnt get em to fit without hacking pipe 3, so i sold it instead. pod filter is an easy way to go, or you could get some bling by looking for the black box that came on the 91-92 ferozas. that would be my suggestion.

as for a cam.... well... buy my rocky, swap heads, and you have the applause cam,

i dont know anything about the mrt chip... cant say. maybe warfs.com mentions them but cant remember.

ya i have been cruising around warf. i do see the mrt header is pricey too
i was reading the old post on that black box too and it seems if you fabbed up a pod filter using 4" piping it would have the same effect.
volume over velocity,or i think thats how the black box works anyway....

i havent found a distributor for lukey the old links i checked werent working.

the chip i seen mentioned here for feroza only and on warf too. mrt got back to me and the billet mrt cam is no longer available and the exchange cam is $$$$$$$

and pv i definitly with get yours if i can!!

here is what they say...

Hi Jeff,


We could have your standard cam shaft reground if you were to send it to us, this would cost approximately $750 - 800.00 AUD.

Unfortunately the chip is no longer available. Yes we can ship the headers to the US, frieght would cost approximately $270.00 AUD, plus $15.00 AUD for insurance, and $20.00 AUD for the bank transfer fee.


Regards,

Julian Caddell

For cams do a search on here and Google for "Ivan Tighe cams" - I think that's the company name?

IMHO the Applause one wouldn't be worth the effort unless you got it for free.

i emailed the Ivan cams place i will post up what thet say soon as i hear back.
still waiting on mrt to give me a total price with shipping for the headers