Outer Limits 4x4 Board

my wheel nut turns the stud so i cant get my wheel off i remember a thread a while ago but cant find it does anyone no the best way to fix this problem(it is a back wheel) on a 87 sierra

undo the 4 bolt in the middle and pull the drum off. from memory thats how it works.

then get something ie vice grips on the back of the stud

yeh the bollts are the long solid type so cant get at the stud

yeh the bollts are the long solid type so cant get at the stud

with the drum off?

i dont hink the drum comes off like that prtty sure the wheel has to be off

noelb1 wrote:undo the 4 bolt in the middle and pull the drum off.

X 2

want33s wrote:

noelb1 wrote:undo the 4 bolt in the middle and pull the drum off.

X 2

X 3 (if its a sierra)

Dozoor wrote:

want33s wrote:

noelb1 wrote:undo the 4 bolt in the middle and pull the drum off.

X 2

X 3 (if its a sierra)

x4 but dont forget to make sure your hand brake is off (unless your andbrake is behind the transfer then leave it on lol)

did you win??

Danzo wrote:

Dozoor wrote:

want33s wrote:

noelb1 wrote:undo the 4 bolt in the middle and pull the drum off.

X 2

X 3 (if its a sierra)

x4 but dont forget to make sure your hand brake is off (unless your andbrake is behind the transfer then leave it on lol)

thought I was going crazy , glad to see I was thinking of the right car I've only had three of em

i will give it a go tomoro

yeh i undid the four bolts in the middle and the drum came off then i just welded the studs from the inside so they couldnt turn