hey guys just wondering if anyone has any pics of the lra sill tanks fitted to a classic rover
i have rock sliders taht bolt through the sills and i am not sure if they will work togeather[/quote]
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rock sliders n sills tanks
Moderator: Micka
rock sliders n sills tanks
5LTR Rangie
Hi there.
I have some sill tanks ( not yet fitted ) but unsure of brand . They are 270mm from mounting bracket to out side.
I have sill mounted rock sliders ( my own design ) ( ripped off the nett ) from the mounting bolts to the chassis is 270mm BUT I could cut off at least 25mm of excess thread . So plenty of room .
Not sure if that helps because I don't know what brand my tanks are.
Cheers
I have some sill tanks ( not yet fitted ) but unsure of brand . They are 270mm from mounting bracket to out side.
I have sill mounted rock sliders ( my own design ) ( ripped off the nett ) from the mounting bolts to the chassis is 270mm BUT I could cut off at least 25mm of excess thread . So plenty of room .
Not sure if that helps because I don't know what brand my tanks are.
Cheers
V8 beats gravity
If you cant buy it , Make it !
Bob tail Rangey
If you cant buy it , Make it !
Bob tail Rangey
i am buying the ones that are listed on ebay atm ther a basic design an the guy has worked hard to make em as well as he has.
as for your sill tanks most are around same size if they are made for the rover so that does actully help. just need to make sure the lra ones are the same
http://www.lrautomotive.com.au/40.html
i am hoping if they cover the sills i will do a 2.5" body lift an they can slide in between the sill an the tanks hopefully
as for your sill tanks most are around same size if they are made for the rover so that does actully help. just need to make sure the lra ones are the same
http://www.lrautomotive.com.au/40.html
i am hoping if they cover the sills i will do a 2.5" body lift an they can slide in between the sill an the tanks hopefully
5LTR Rangie
http://cgi.ebay.com.au/Range-Rover-4-do ... dZViewItem
he does make em for 2 doors as well lol
hope the sills on your ute are still mostly intact mate as there is all ready a set waiting lol
he does make em for 2 doors as well lol
hope the sills on your ute are still mostly intact mate as there is all ready a set waiting lol
5LTR Rangie
Why, the ute already has a set on it 
I don't want them, I make my own, just wanted to know ho they mounted, so i could tell you they ain't gonna fit with the tanks
Need to cut little notches out where the tanks bolt to the sills, and your better of getting tanks made so they suit the body lift anyway
I don't want them, I make my own, just wanted to know ho they mounted, so i could tell you they ain't gonna fit with the tanks
Need to cut little notches out where the tanks bolt to the sills, and your better of getting tanks made so they suit the body lift anyway
Wanted: Car trailer or beaver tail truck, let me know what you got
They were there tololrusty_042 wrote:omfg lol brilliant lol
u have sliderson now lol they wernt there last time we saw the ute lol
yer i was just looking as there cheap i should prolly wait but who knows lol
i was gonna get the lra 2.5" kit
and its gotlol 40mm body liftlol Stop writing lolololloololoooooooooo Its very hard to understand
Wanted: Car trailer or beaver tail truck, let me know what you got
here's a pic of my sliders that I made recently. Made from 75 x 50 x 3 RHS welded to a 5mm plate which is held by 6 bolts through the sill. Crush tubes have been welded into the sill. The bolts going through the sill are 10mm HT (grd 8) with nylocs. Any excess thread on the bolts has been trimmed so the only thing sticking out the inside of the sill is a flat washer and a nyloc nut.
Cheers
Andrew[/img]
Cheers
Andrew[/img]
I have a '96 disco (virtually identical to a classic Rangie underneath) with the LRA 2 1/2" body lift. I fitted a set of sill tanks from a 4dr Rangie. The tanks had to be modified to accomodate some extra floor bracing on the disco.
I changed the tank mounting brackets to sit it as high as I could aaginst the floor. So now when you look at the side of the car you can't see the tanks. The lowest point of the tank is level with the bottom of the chassis rail.
There is still 10 - 15mm clearance between the tanks and the original sill. So I expect there would be no problem fitting sliders. I plan to make a set in the near future.
I changed the tank mounting brackets to sit it as high as I could aaginst the floor. So now when you look at the side of the car you can't see the tanks. The lowest point of the tank is level with the bottom of the chassis rail.
There is still 10 - 15mm clearance between the tanks and the original sill. So I expect there would be no problem fitting sliders. I plan to make a set in the near future.
Toy 100 series now with a few mods
Disco1 with lots of mods - lift, locked and loaded. (sold)
Disco1 with lots of mods - lift, locked and loaded. (sold)
Who is online
Users browsing this forum: No registered users and 22 guests