Page 1 of 1
LED Strip tail lights
Posted: Sun Oct 07, 2007 8:33 pm
by dano80
Anyone knows who makes the LED strip tail lights, these also come in the same size for the indicators. I think they must be about 150-200mm wide and maybe only about 15-20 mm high. Looked at all the web sites I know and then some, but still know luck so im throwing open........any ideas??? Needed shortly for rear bar rebuild.
Cheers, Dano.
Posted: Sun Oct 07, 2007 9:04 pm
by beretta
ebay has heaps of them thats where i got mine from.
Posted: Mon Oct 08, 2007 2:11 pm
by rot8s
hella make them or google search for led technologies they also do them online
Posted: Mon Oct 08, 2007 6:49 pm
by dano80
Cheers Fellas, had a good look at 'web' last night think I may have it sorted!
Cheers, Dano.
Posted: Tue Oct 09, 2007 7:12 pm
by short stuff
try these guys
http://ledautolamps.com/default-old.htm
they deal through most places such as truck shops and auto shops
Posted: Tue Oct 09, 2007 7:47 pm
by dano80
Great, They are the ones I'm after, Will head off to Burson's tomorrow as they are a supplier of the product and local to me.
Cheers again, Dano.
Posted: Tue Oct 09, 2007 7:56 pm
by dano80
You know whats funny, some trucks only use these lights (I mean on their own, In conjunction with no other ones!) And as far as I can tell the buggers arn't DOT approved.........Oh well, get them anyway, haven't heard any stories of anyone getting pulled over for some LED's......yet!
They just look so much better than all the other crap on the market at the moment!
Posted: Wed Oct 10, 2007 7:49 pm
by dano80
OK. I spoke to my bro-in-law (ex cop) and he doesn't seem to see why it would be an issue, he reckons they would only pick them if you were caught for using a mobile or some other stupid traffic offence! So I ordered some from Bursons today, should have left Vic. today and be here thurs lunchtime..........will keep you posted. Very well priced too, I payed $100 for the 2 indicators and 2 brake/talilights!
Time to go to Jaycar to see about some load resistors.
Posted: Thu Oct 11, 2007 2:15 pm
by phippsy
Load resistors, to stop the indicators flashing quickly? I put in a non load sensitive flasher unit. Was easy as to just replace the standard one.
Posted: Thu Oct 11, 2007 2:38 pm
by HeathGQ
AutoBarn are selling ADR approved strip LED's
Posted: Thu Oct 11, 2007 4:03 pm
by dano80
OK, got to Bursons handed over the coin and walked away with 2 pairs of ADR approved led strips, Didn't realise that they were approved.........but they are! As soon as I get some steel 50X70X5mm will build the rear bar work. Hehehe, its going to look so hornbag!!!!
Dano.