Page 1 of 1
GU ute lift
Posted: Wed Oct 10, 2007 9:50 am
by aidannorris
im planning on putting a 3inch lift on my GU ute, the question i have is - will i need to do a body lift for 33's?
Posted: Wed Oct 10, 2007 9:57 am
by DanielS
with a 3" lift in the GU you should be right fitting 33s.
Hope it goes well
edit... I thought 3 inch was suspension lift...
Daniels
Posted: Wed Oct 10, 2007 11:35 am
by benhl
do they scrub out now??? Cros it up and check. I think you should be fine with almost no lift.
Say no to Body Lift
Posted: Wed Oct 10, 2007 12:05 pm
by WICKED
Buy a grinder and Disc..... To body lift Austraila says no!
Posted: Wed Oct 10, 2007 12:57 pm
by MattGU
I have a GU ute with coils all round 3 inch lift and run 285/75 no problems. YOu shouldn't need any body lift.
Check this thread
http://www.outerlimits4x4.com/phpBB2/vi ... p?t=121837
Posted: Wed Oct 10, 2007 1:10 pm
by mickyd555
i ran 33's on my wagon for about 6 months that had shagged as suspension. on a ute it should be fine.
Posted: Thu Oct 11, 2007 5:39 pm
by Dick
Stacks of room with 3" lift ... can send pics if you like
I have Dobis in front and XGS in rear (thats the way it came!) I changed front STIFF Dobis springs for 18mm items and its a lot better ride.. off the shelf Dobis are 19mm front.. HEAVY !
Rears are 22mm
Posted: Thu Oct 11, 2007 7:51 pm
by JOHNZ
Mate if you fit a true 3" lift you can even fit 35s
Posted: Thu Oct 11, 2007 9:40 pm
by [gubeaut]
JOHNZ wrote:Mate if you fit a true 3" lift you can even fit 35s
definately will be able to fit 33 i have 3 inch lift and i ran 35 claws now i run 36 inch swampers the only thing i had to do was take the flares off until I bought radius arm spacers for $50 and fixed that issue