Outer Limits 4x4 Board

Anybody have any experience with this? I would like to set up a Rover V8-R151F-Dual cases but havent been able to find anybody who has done the Rover V8-R series conversion.

Hey Adam...

Not sure that posting in the Yota section will yield the best results for this question.

Try posting in the Rover forum and contacting Overkill Engineering http://www.overkill4x4.com/ to see if they have done or could do the adaptor that you are after.

Other contacts would be...
http://www.cheezyracing.com.au/
http://www.dobbinengineering.com/

Dellow automotive should have a bellhousing to suit.

Check out http://www.dellowauto.com.au

R series bell housings are longer than standard G/W series. If you get on to www.toymods.net/forum some one was making an adaptor plate to suit G/W bell housing on an R series box. This way you could use I believe dellows's rover G/W bell housings already available. If they dont already make and R series one.

Buddy