Page 1 of 1
Will i need bent upper arms
Posted: Sat Oct 13, 2007 11:30 pm
by mudmav
Hey Zguys i have a swb mav 2inch body and 3 inch spring lift. I am just about to fit an LRA 146 ltr tank with modified brackets to suit the body lift. My question is will i need to fit bent upper arms. if so is it both arms or just one side (which side). Thanks guys
Re: Will i need bent upper arms
Posted: Sun Oct 14, 2007 6:41 am
by jessie928
mudmav wrote:Hey Zguys i have a swb mav 2inch body and 3 inch spring lift. I am just about to fit an LRA 146 ltr tank with modified brackets to suit the body lift. My question is will i need to fit bent upper arms. if so is it both arms or just one side (which side). Thanks guys
you will only need the bent upper arm ( drivers side) if you fit a belly tank. You donot need one with a rear mount tank.
jes
Posted: Sun Oct 14, 2007 9:57 am
by steveoo
it also depends what type of belly tank you have since the one i got doesnt need a pre bent upper arm
Posted: Sun Oct 14, 2007 10:53 am
by jessie928
steveoo wrote:it also depends what type of belly tank you have since the one i got doesnt need a pre bent upper arm
you probably have a LWB, and one that hangs down below the chassis rails
the shorty belly tanks extend under the control arm
JEs