Page 1 of 1
Solid to Vented Rootor Swap 97 Disco
Posted: Wed Oct 17, 2007 8:02 am
by LOCKEE
Ritters used to do a conversion for the spacer in the front caliper with o rings bolts and spacers.
Anyone know where I can source in vic or another way to do this.
Have Vented rotors already to go on.
Posted: Wed Oct 17, 2007 9:51 am
by DaveS3
RangeRov in Mitcham CAN get the spacers.
Triumph rover spares in Adelaide sell a complete kit on their website for about $450.
I just ordered Defender Calipers (Bigger pistons-46mm)from Paddocks in the UK at 60pound each, so with some other gear they are on their way to my door at bong on $500.
Ends up being easier / cheaper to just buy new from the UK if you need some other gear as well.
Dave.
Posted: Wed Oct 17, 2007 12:17 pm
by walker
Same here. I just ordered new calipers from padocks. It was much cheaper to do this than buying the conversion kit. I only ordered the standard Rangie calipers for Vented rotors.
Was just over $300 delivered.