Page 1 of 1
Bent front diff housing
Posted: Wed Oct 17, 2007 10:57 am
by riordons
Does anyone know where (Melbourne Geelong Ballarat area) I could get a 80 series front diff housing straightened it is bent to about 3 degrees negative camber on the drivers side and 2 degrees on left (guessing as have not had a wheel alignment done)? They ar'nt built for jumping on dunes!!:?:
Posted: Wed Oct 17, 2007 12:27 pm
by Leighroy1984
Posted: Wed Oct 17, 2007 4:45 pm
by mugginsmoo
geelong diff srevices, can't remember what their address is.
i'm gonna guess that it won't be cheap, might be cheaper to find another housing
Re: Bent front diff housing
Posted: Wed Oct 17, 2007 7:27 pm
by JWB
riordons wrote:Does anyone know where (Melbourne Geelong Ballarat area) I could get a 80 series front diff housing straightened it is bent to about 3 degrees negative camber on the drivers side and 2 degrees on left (guessing as have not had a wheel alignment done)? They ar'nt built for jumping on dunes!!:?:
Did I hear someone say " Insurance claim?"
Accidental Damage!
cheers
Posted: Wed Oct 17, 2007 11:02 pm
by pigletracing
DRIVELINE SERVICES in all states
Posted: Thu Oct 18, 2007 3:59 pm
by bazzle
Transdiff in Bayswater.
Bazzle
Posted: Sun Oct 28, 2007 2:40 pm
by rodrocket
this should help
RJ Kent & sons
they are in the Clayton area & specalise in this type of work
Kent R & Sons (Vic) Pty Ltd
66 -70 Renver Rd Clayton 3168
(03) 9544 7326
Mobile Services0433 053 833
Mobile Services0438 049 551
Fax(03) 9543 6431
Posted: Mon Oct 29, 2007 1:29 pm
by chunks
Go to a truck alignment shop, they should be able to do it in-car for about $400 or so. Its very common for them to bend the axle when they wheel align trucks to achieve the desired alignment settings. I have seen the same problem in a saf 100 series, apparently the vehicle was jumped causing the housing to bend and give negative 2 degrees camber.
