Page 1 of 1
Wiring Diagram for Coily Model Sierra
Posted: Fri Oct 19, 2007 1:01 am
by -ZukChiK-
Can anyone provide me with a wiring diagram (of harness) for the later model zooks or what manual I can find it in?
Cheers,
Jo
Posted: Mon Oct 22, 2007 2:48 pm
by WasabiPimpNinja
I have a Haynes manual from Pomgolia that I use for my Coilly. I'll see if I can find it and scan it for you. I'm not sure if it'll all be the same, but I haven't found anything too different between the models...
Posted: Mon Oct 22, 2007 3:16 pm
by -ZukChiK-
Cheers mate
I've downloaded just about everything on suzukiinfo.com but not sure if the G13BA TBI wiring diagram is the one I require. Having got a PM from another member the proper coily diagram is not 100% accurate anyway but I'll work it out....
Cheers,
Jo
Posted: Wed Oct 24, 2007 9:57 am
by WasabiPimpNinja
This is what I have in my manual, it might be the same as what you already have, but I'm pretty sure most things will be the same....
http://www.globaldial.com/~gannaj/keels ... wiring.pdf
Hope this helps
<EDIT> PS: If you cant read some things just let me know and I'll try and work it out for you from the manual, it's hard enough to read from the book let alone scanned
Posted: Wed Oct 24, 2007 12:25 pm
by -ZukChiK-
Thanks Wasabi
Did you use the Sidekick/Tracker (Vitara) diagrams for your Sierra though? I wouldn't have thought they'd be the same? Is there a wiring section for just the Samurai (Sierra)? I'm guessing there's no difference between the '96 models with the G13BA & the '98s (or whenever they stopped making them) I think the dash came from a '98 model......
Cheers for your help!
Jo
PS I can read it fine
Posted: Wed Oct 24, 2007 12:33 pm
by WasabiPimpNinja
I haven't found much different from my '97, and I cant imagine it'd be different from a '98. It should give you a basic idea of how it all went together. What exactly are you trying to sort out?
Posted: Wed Oct 24, 2007 1:00 pm
by -ZukChiK-
We're doing a dash swap in a sierra - 98 model dash & loom into a 90 model soft top and pretty much rewiring the whole lot.... just need a diagram for the later model loom:
Thread on it here:
http://www.outerlimits4x4.com/phpBB2/vi ... light=dash
Posted: Wed Oct 24, 2007 9:53 pm
by mud4b
all wires match up in colour 100% but the pinouts are different.
i think there is 2 extra wires in the sj80 dash, one being violet (yellow tracer)
and cant remeber the other. violet is the engine check/ diag wire, the other is for a speed sensor that was never used in aus.
there is no difference between sj80 year models unless you have a import with tbi.
cheers mark
Posted: Wed Oct 24, 2007 10:32 pm
by -ZukChiK-
mud4b wrote:all wires match up in colour 100% but the pinouts are different.
i think there is 2 extra wires in the sj80 dash, one being violet (yellow tracer)
and cant remeber the other. violet is the engine check/ diag wire, the other is for a speed sensor that was never used in aus.
there is no difference between sj80 year models unless you have a import with tbi.
cheers mark
Cheers for that Mark
That also confirms the G13BA 'tbi' diagram on suziinfo isn't the one I needed (which I thought) despite others assuming this website has all the answers!! Thanks again, Jo.