Warn Controller wiring 5pin

Post by **spazbot** » Wed Jan 14, 2004 11:23 am

Ok im planning on putting a in cab controller switch in for my warn xd9000, i need to know how to wire up the 5 wires for controller to the switch, as in what needs to go where etc ??
Does anyone have a pic or a wiring diagram.

Post by **spazbot** » Wed Jan 14, 2004 12:04 pm

Ok ive found the info i was looking for, ill do a little write up on how i set it all up and inc some pics etc.

Website · Post by **Maggot4x4** » Thu Mar 11, 2004 10:34 pm

spazbot wrote:Ok ive found the info i was looking for, ill do a little write up on how i set it all up and inc some pics etc.

Hows this going?

Post by **slowhilux** » Mon Mar 22, 2004 6:47 pm

yeah james hows this all going?? i will be doing the same in a few months.......

Phill

Post by **spazbot** » Mon Mar 22, 2004 6:59 pm

got all the diagrams etc here, just gotta wire it up soon, ill post up everything when i do

Post by **tuff 45** » Wed Mar 24, 2004 6:29 pm

spazbot wrote:got all the diagrams etc here, just gotta wire it up soon, ill post up everything when i do

I wired mine up in the cab and all you have to do is run 2 switche's in the cab, 1 for out and 1 for in, 2 wire's per switch. If you run the wire's straight from the solonoid's you can also leave the plug on the front of the winch and work it from out of the cab as normal.

Post by **slowhilux** » Wed Mar 24, 2004 6:58 pm

tuff 45,
yeah mate thats what i plan on doing (when i get a winch :roll:

), but instead of using 2 switches, i will use 1 switch that is:-
ON(momentary)-OFF-ON(momentary), ie, so it springs back into the off position as soon as you let it go. 1 On will = IN, and the other ON will = OUT

Phill

Post by **tuff 45** » Wed Mar 24, 2004 7:31 pm

slowhilux wrote:tuff 45,
yeah mate thats what i plan on doing (when i get a winch ), but instead of using 2 switches, i will use 1 switch that is:-
ON(momentary)-OFF-ON(momentary), ie, so it springs back into the off position as soon as you let it go. 1 On will = IN, and the other ON will = OUT

Phill

Sound's good.

Post by **Bad JuJu** » Wed Apr 27, 2005 6:41 pm

hey 13 months and a few days later ...... can anyone point me to the wiring setup/instructions used...

Post by **spazbot** » Wed Apr 27, 2005 11:22 pm

heres some diagrams

Post by **Bad JuJu** » Thu Apr 28, 2005 2:24 pm

nope, unless they are little x's.

Post by **spazbot** » Thu Apr 28, 2005 5:48 pm

oh well they been posted heaps in here search and find em

Post by **blkmav** » Thu Apr 28, 2005 5:53 pm

Post by **Bad JuJu** » Thu Apr 28, 2005 8:43 pm

Thanks, I did search and all images were busted.

Outer Limits 4x4 Board

Warn Controller wiring 5pin

Warn Controller wiring 5pin

Who is online