Page 1 of 1
80 series Double Cardin Front Tail shaft
Posted: Mon Oct 22, 2007 9:35 pm
by vSAHARAx
Hey All
before you all tell me to search i have, and im unsuccessful at using it properly
.
QN: Where in brisbane can i get a double cardin front tail shaft for my 80 series, rough price, dont care, just want one made as i need it pretty bad!!!
Yes im installing a part time kit, but running up and down the beach at fraser with that vibration will drive me nuts.
I dont really have much time to run around so i just want a one stop shop
Thanks in advance
Troy
Posted: Mon Oct 22, 2007 9:39 pm
by Hoonz
do they have a hardie spicer down there?
Posted: Tue Oct 23, 2007 5:30 pm
by bruiser
got mine from a driveline place on Newman Road (geebung.)
Cost about $700. driv in, drive out.
Ran that with a 6inch lift for years without a part time kit no worries.
Posted: Tue Oct 23, 2007 6:19 pm
by badger
driveline services
i think dura shock will do them too.
Posted: Tue Oct 23, 2007 7:39 pm
by rvh96
petron auto at hillcrest make them about $650 or about $450 to fit one in your shaft
Posted: Tue Oct 23, 2007 7:45 pm
by bruiser
also, not all D/C are created equal. Some will operate on much larger angles than others.
Posted: Wed Oct 24, 2007 8:52 am
by ... rick
bruiser wrote:also, not all D/C are created equal. Some will operate on much larger angles than others.
Exactly. As with all gear, you get what you pay for. This isn't the item to be trying to save a few bucks on. Buy a quality DC and you will enjoy it for years, buy a cheap crapper and it will give you untold grief.
Posted: Wed Oct 24, 2007 12:12 pm
by midi73
What are hilux dc's like? I cant see why you couldnt get one of these and get a new tube put on (by a tailshaft mob) that is the right length to fit the 80.
Posted: Wed Oct 24, 2007 5:01 pm
by vSAHARAx
rvh96 wrote:petron auto at hillcrest make them about $650 or about $450 to fit one in your shaft
im only guessing here, i could be totally wrong, I think mick (micks troll) told me you do them? is petron auto your shop? where abouts at hill crest?
Cheers Troy
Posted: Wed Oct 24, 2007 7:29 pm
by rvh96
vSAHARAx wrote:rvh96 wrote:petron auto at hillcrest make them about $650 or about $450 to fit one in your shaft
im only guessing here, i could be totally wrong, I think mick (micks troll) told me you do them? is petron auto your shop? where abouts at hill crest?
Cheers Troy
yes it is my shop we are at 19 tradelink dr