Page 1 of 1
suzuki 6 stud axles
Posted: Thu Oct 25, 2007 8:39 pm
by built4thrashing
did suzuki ever put 6 stud axles in any of their vehicles including the import jimny's? Found some sierra diffs on ebay that have them. just curious if they are really zook diffs.
listing has been removed as i might have bought them.
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :RTQ:AU:11
Posted: Thu Oct 25, 2007 9:19 pm
by want33s
I doubt they are factory but they did spike my interest cause
I've got front and rear NT diffs in my shed that are six stud and from what I can tell have not been redrilled. If they have been converted(very likely) they used new blank discs and drums.
Posted: Thu Oct 25, 2007 9:19 pm
by Dee
nice one let us know if they fit nissan/toyota rims. ill be cut i didnt buy them if they do!
anyone got some 6 stud suzi axles?
Posted: Thu Oct 25, 2007 9:20 pm
by Dee
nice one let us know if they fit nissan/toyota rims. ill be cut i didnt buy them if they do!
anyone got some 6 stud suzi axles for sale?
Posted: Thu Oct 25, 2007 9:21 pm
by want33s
DEEV8 wrote:nice one let us know if they fit nissan/toyota rims. ill be cut i didnt buy them if they do!
anyone got some 6 stud suzi axles?
I don't want mine.. PM me if you do!
Posted: Thu Oct 25, 2007 9:35 pm
by nicbeer
bigmick i think on here had a set. they were green in colour and posted on here a couple times, working out what rims or axles they were.
Posted: Thu Oct 25, 2007 10:15 pm
by want33s
nicbeer wrote:bigmick i think on here had a set. they were green in colour and posted on here a couple times, working out what rims or axles they were.
want33s wrote:I don't want mine.. PM me if you do!
One and the same mate. Hammertone green with pretty yellow brake lines.
Posted: Fri Oct 26, 2007 8:36 pm
by built4thrashing
got a mate picking them up for me on tuesday but i wont get my hands on them till late november.
Guy said they came off an imported jimny and he had cruiser rims on it. I just hope the ctrs are identicle and the axles swap over.
Posted: Fri Oct 26, 2007 8:53 pm
by nicbeer
You sure they are a WT housing? as the 3,9s are from NTs
Posted: Fri Oct 26, 2007 9:19 pm
by want33s
Doesn't matter if it's WT or NT... You only redrill the disc's and drum's anyway.
Posted: Fri Oct 26, 2007 9:39 pm
by nicbeer
want33s wrote:Doesn't matter if it's WT or NT... You only redrill the disc's and drum's anyway.
not for the axles and cvs if he needs them as the axles are longer in the WTs.
Posted: Sat Oct 27, 2007 7:49 am
by built4thrashing
im more after the ctrs. housings and axles were just a bonus for the price i paid.
Might even sell the parts i dont need. anyone interested?
Posted: Sat Oct 27, 2007 3:59 pm
by Rotazuk
They could be factory 6 stud suzuki axles . I had a set on an import 413 I had . It even had aircon
. Gtreat for down hills , turn it on and its a great engine brake .
They use all the same parts as a normal suzuki axle , even the wheel studs are the same . Seal kits etc are the same . I ended up putting disc's on the rear and have lost the drums
but still have the front hubs . You can swap out the 6 staud parts for 5 if you want .
I ran nissan patrol rims on mine , cheep and nice and wide for a 413 . They are the standard jap 6 stud pattern .
Cheers
Chris
Posted: Sat Oct 27, 2007 5:52 pm
by want33s
I sold my set today. I had never had them off the diff before but after seeing them off today, they weren't redrilled they were cast for six stud. Must be factory parts.
Posted: Sat Oct 27, 2007 9:34 pm
by ofr57
hmmmmmmm
how much offset can you get off the shelf on a nissan rim?
Posted: Sun Oct 28, 2007 7:31 pm
by built4thrashing
