Page 1 of 1

info on diffs needed

Posted: Fri Oct 26, 2007 11:15 am
by 2roky
wanting specs on the feroza rear and front diff heads ie sizes of gears as well as splines etc and the same for the rocky f70-75

im wanting this info as im goin to have a look round at other vehicle diffs to see if any match up for diff locks
cheers

please no high jacking of this thread i will inform everyone of what i find all in due time.

Posted: Fri Oct 26, 2007 11:20 am
by ferozamaniac

Posted: Fri Oct 26, 2007 7:50 pm
by MightyMouse
Been there - tried that, changed whole axle.

Front spline a major problem - couldn't find anyone with a broach to do the job or a gear from another make/model that was suitable.

Wish you luck - if you manage to lock a Feroza front, I will be the first order you get - and I am VERY serious.

Posted: Fri Oct 26, 2007 8:51 pm
by 2roky
at this stage im only lookin at the rear diff but will keep the front in mind. i was thinking i might just put a suzuki vitara diff in the front end of mine to get around that problem.

Posted: Fri Oct 26, 2007 10:47 pm
by MightyMouse
How do you plan to handle the ratio issue, change front and rear ?

Your going to hurt the already too high transfer situation even more if you go below the 5.285:1 ratio already fitted.

Thats why I went Toyota, could match front ratio, and If I want to change stuf even more down the track there are higher ratios available.

Posted: Sun Oct 28, 2007 6:54 pm
by 2roky
i would most probably change both when i do it. im toying with the idea of getting a wreaked f300 in the next year or so and a wreaked hilux or other Ifs sprung vehicle and figureing out how hard it will be to swap whole diff, hub and arms etc over into the feroza. which then would leave more options for rear diffs and ratios. this wont be happening untill i get the dollars to do it lol at uni so funds for experimenting at this stage are tight

Posted: Sun Oct 28, 2007 7:16 pm
by MightyMouse
IMO you need to look at the whole package, diffs, transfer/gearbox, wheels,
suspension and engine.

Without an overall approach, you will move from one issue to another. What you are proposing is a lot of work and $$ - having done it I know.

Posted: Mon Oct 29, 2007 7:06 am
by cj
There have been a couple of guys that have swapped the Hilux IFS front diff into a Vitara along with rear diff. Something similar maybe possible.

http://www.pirate4x4.com/forum/showthread.php?t=318480

http://www.zukiworld.com/forum/index.php?topic=8896.0