Outer Limits 4x4 Board

ok i pulled out my springs 2day put the rears up frnt and ifs rears in i also have 2inch shackels all round and 50mm lift blocks on the rear, droped it off the hoist and the ifs go flat and the thing is almost on the bump stops in the rear looks like its doin a mono so no wheeling moro , but what do i do to get it sitting right still gt 2 2inch droped frnt cross member 2 put in yet guna make it sit evn mre crap. do i just make up super huge ginormas rear shackels to get it right or is there a better way?

the rear shackles need to be 200mm eye to eye for them to be at the right angle. also if you have a terol motor you will need lifted ifs springs or lift/lowering blocks also on the rear

jus measured the snake ones are already 175 is an extra 25mm realy guna make enoughy difference was thinking mre like 400?