Outer Limits 4x4 Board

dumb question time
its ben a while since i've taken axels out,
whats the best way you would take the rear axels out of a zook,
Just got my locked centre back and now the axels wont come back, and yes the backing plate is loose!

thanks in advance

slide hammer

Thanks spike,
dont have one and my find that does lent it to his dad.
Found another way
flip the drum around and only just thread the bolts on by 3 turn, leaves just enough room to be a small slide Drum (slide hammer)

I made one out of
a broken pully puller
abit of reobar
3 inch body lift block
a washer
a nut

Put the drum on backwards and do the nuts up a little , use the weight of the drum as a slide hammer , Cheers Paul.

yay
Trail Tough mini-spool is now in the rear

chirp.chirp.chirp.chirp.chirp

just turn the drum around on the studs, keeping them loose and it should act as a slide hammer. worked everytime for me, or leave the wheel on the studs with loose nuts, acts as a slide hammer also

I am guessing that no one bothered to read my second post
its kinda funny though, everyone says the same thing

yeh just confirming